Posted by
ok1rr on
Mar 18, 2006; 4:40am
URL: http://elecraft.85.s1.nabble.com/Coax-Switch-between-two-rigs-tp387104p387106.html
Looking at the Rob Sherwood's receiver data table
http://www.sherweng.com/table.htmlI discovered a remarkable fact: the K2's weakest point is the FILTER
ULTIMATE REJECTION. Sherwood says it is 80 dB only (and there are two
K2s) and it was confirmed by one of our top grade contesters and
DXpeditioners.
A closer look onto schematic awake an idea to reuse KSB2 crystal filter
for receiving on both CW and SSB. No doubt the additional 7 crystals
will improve this figure significantly. I had no opportunity to track
the rather complex diode switching scheme but Sherwood's figures saying
it clearly – there are 5+2 crystals in CW receive path only. So my
question: is there any mod to improve the ultimate rejection using KSB2
crystal filter? (of course, G3RXQ's filter mods are here but I don't
plan to destroy a KSB2 board and I am not interested in SSB). Would any
experienced K2 builder willing to play around this?
And a QSK improvement to listen between elements up to 40 wpm would made
from the K2 a dream radio :-)
I don't own my K2 yet but a 100 dB ultimate rejection would ensure me
that I should't lose my time with thinking if to buy or not :-)
73,
Martin, OK1RR
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com