RE: XV-50 Power Output Question

Posted by Ron D'Eau Claire-2 on
URL: http://elecraft.85.s1.nabble.com/XV-50-Power-Output-Question-tp388549p388550.html

Dennis WB0WAO asked:
I know that the XV-50 ouput is 25w, but is there a way to _modify_ it so
that its max output is around 10w?

-----------------

Sure! The output power is controlled using the POWER control on your K2, or
other 28 MHz if you're not using a K2. If you have a 28 MHz rig without a
variable output power, you can still adjust the output from the XV50 over a
fairly wide range by selecting various combinations of jumpers and adjusting
a trimmer pot in the XV50.

I've only used a transverter with the K2, so I can't say that the range of
the internal attenuators will let you select 10 watts out for any fixed
input power within its working range, but it's quite flexible.

Ron AC7AC

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com