Posted by
Don Wilhelm-3 on
URL: http://elecraft.85.s1.nabble.com/K2-Part-II-Alignment-Probs-tp389346p389349.html
Mark,
Can you be specific about how you are determining that the BFOs are on the
wrong side of the carrier?
Using 40 meters, tune in a signal, then tune the pitch of the signal to a
lower tone, observing which way you turn the VFO dial - if you have LSB or
CW selected, the pitch should become lower as you tune lower in frequency -
USB and CWr will be the reverse.
If you indeed do have inverted sidebands, then re-check the BFO range test
and let us know what the high and low BFO frequencies are. and let us know
the number (x.x) that was marked on the envelope your crystals were packaged
in.
Also, do you have the KSB2 installed yet or not?
73,
Don W3FPR
> -----Original Message-----
> From:
[hidden email]
> [mailto:
[hidden email]]On Behalf Of Mark Bayern
> Sent: Thursday, May 04, 2006 2:58 PM
> To: Darwin, Keith
> Cc:
[hidden email]
> Subject: Re: [Elecraft] K2 Part II Alignment Probs
>
>
> On 5/4/06, Darwin, Keith <
[hidden email]> wrote:
> > Like you, I used the settings from the manual for CAL FIL and they
> > worked OK. Several weeks after completing the rig I went back and
> > optimized them with Spectrogram.
>
> Not quite -- when I use the manual's values I'm on the wrong side of
> the passband.
> _______________________________________________
> Elecraft mailing list
> Post to:
[hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>
http://mailman.qth.net/mailman/listinfo/elecraft>
> Help:
http://mailman.qth.net/subscribers.htm> Elecraft web page:
http://www.elecraft.com>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.392 / Virus Database: 268.5.3/331 - Release Date: 5/3/2006
>
>
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com