Re: K2 Part II Alignment Probs
Posted by
Mark Bayern-2 on
URL: http://elecraft.85.s1.nabble.com/K2-Part-II-Alignment-Probs-tp389346p389350.html
> If you indeed do have inverted sidebands, then re-check the BFO range test
> and let us know what the high and low BFO frequencies are. and let us know
> the number (x.x) that was marked on the envelope your crystals were packaged
> in.
Doing the BFO Test from page 62:
BFO high freq 4916.20
BFO low freq 4911.09
BFO freqs measured at TP2.
band+ band-
FL1 4913.61 4916.21 4911.01
FL2 4913.22 4916.20 4911.09
FL3 4913.22 4916.20 4911.09
FL4 4913.11 4916.20 4911.09
The first column of freqs is the BFO frequency before pressing the B+
or the B- button. Note that C22 (the 4.000MHz calib) is not calibrated
at this time.
The crystal envelope had a 3.7 (three point seven) written on its front.
>
> Also, do you have the KSB2 installed yet or not?
KSB2 is not yet installed.
Thanks!
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com