Re: K2 Part II Alignment Probs

Posted by Mark Bayern-2 on
URL: http://elecraft.85.s1.nabble.com/K2-Part-II-Alignment-Probs-tp389346p389356.html

> Can you be specific about how you are determining that the BFOs are on the
> wrong side of the carrier?

I'm listening to the 7.040MHz generated by an XG2.  When I have CW
(not R) selected the pitch goes down as I turn up in frequency.

I'll give you the BFO high & low freqs and the marking on the crystal
envelope when I get home in an hour or so.  No KSB2 yet. I'll add it
after the basic rig works.

Thanks for the response.

Mark

>
> Using 40 meters, tune in a signal, then tune the pitch of the signal to a
> lower tone, observing which way you turn the VFO dial - if you have LSB or
> CW selected, the pitch should become lower as you tune lower in frequency -
> USB and CWr will be the reverse.
>
> If you indeed do have inverted sidebands, then re-check the BFO range test
> and let us know what the high and low BFO frequencies are. and let us know
> the number (x.x) that was marked on the envelope your crystals were packaged
> in.
>
> Also, do you have the KSB2 installed yet or not?
>
>

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com