http://elecraft.85.s1.nabble.com/K2-Part-II-Alignment-Probs-tp389346p389357.html
Mark, while you have the probe in TP2, also check the BFO frequencies for CW
> -----Original Message-----
> From:
[hidden email]
> [mailto:
[hidden email]]On Behalf Of Mark Bayern
> Sent: Thursday, May 04, 2006 6:07 PM
> To:
[hidden email]
> Cc:
[hidden email]
> Subject: Re: [Elecraft] K2 Part II Alignment Probs
>
>
> > Can you be specific about how you are determining that the BFOs
> are on the
> > wrong side of the carrier?
>
> I'm listening to the 7.040MHz generated by an XG2. When I have CW
> (not R) selected the pitch goes down as I turn up in frequency.
>
> I'll give you the BFO high & low freqs and the marking on the crystal
> envelope when I get home in an hour or so. No KSB2 yet. I'll add it
> after the basic rig works.
>
> Thanks for the response.
>
> Mark
>
>
> >
> > Using 40 meters, tune in a signal, then tune the pitch of the
> signal to a
> > lower tone, observing which way you turn the VFO dial - if you
> have LSB or
> > CW selected, the pitch should become lower as you tune lower in
> frequency -
> > USB and CWr will be the reverse.
> >
> > If you indeed do have inverted sidebands, then re-check the BFO
> range test
> > and let us know what the high and low BFO frequencies are. and
> let us know
> > the number (x.x) that was marked on the envelope your crystals
> were packaged
> > in.
> >
> > Also, do you have the KSB2 installed yet or not?
> >
> >
> _______________________________________________
> Elecraft mailing list
> Post to:
[hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>
http://mailman.qth.net/mailman/listinfo/elecraft>
> Help:
http://mailman.qth.net/subscribers.htm> Elecraft web page:
http://www.elecraft.com>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.392 / Virus Database: 268.5.3/331 - Release Date: 5/3/2006
>
>
Subscriber Info (Addr. Change, sub, unsub etc.):