Posted by
Darwin, Keith on
URL: http://elecraft.85.s1.nabble.com/K2-Part-II-Alignment-Probs-tp389346p389358.html
Let me try that again :-). Like you I used the values from the manual.
Unlike your case however, I got good results. Just wanted to let you
know using values straight out of the manual can get you pretty close.
Something is not quite right with your rig ...
... But you already knew that :-)
- Keith -
-----Original Message-----
On 5/4/06, Darwin, Keith <
[hidden email]> wrote:
> Like you, I used the settings from the manual for CAL FIL and they
> worked OK. Several weeks after completing the rig I went back and
> optimized them with Spectrogram.
Not quite -- when I use the manual's values I'm on the wrong side of the
passband.
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com