RE: Another potentially embarrassing question

Posted by Don Wilhelm-3 on
URL: http://elecraft.85.s1.nabble.com/Another-potentially-embarrassing-question-tp389361p389363.html

John,

There is a phone jack on the adapter that will ACCEPT an external PTT switch
(A footswitch is commonly used).

If you have nothing that you can use for a PTT switch, you can always use a
key or paddles - just close the dot paddle in SSB mode and the K2 will go
into transmit.

73,
Don W3FPR

> -----Original Message-----
> From: [hidden email]
> [mailto:[hidden email]]On Behalf Of John Wiener
> Sent: Thursday, May 04, 2006 5:04 PM
> To: [hidden email]
> Subject: [Elecraft] Another potentially embarrassing question
>
>
> I just got the Proset-K2 headset.  I put in all the jumpers on the
> mic header, placed the resistor between pins 1 and 6 of the mic socket.
>
> I have yet to do final Alignment.  Will this arrangement mess up the
> alignment procedures?
>
> Also,
> The "Test and Set-up" refers to a PTT button on the Proset-K2.
> Here's the embarrassing part: I can't find the button.
> There is no manual that shows details of the headset.
>
> Any help appreciated.
>
> John
> AB8WH
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.392 / Virus Database: 268.5.3/331 - Release Date: 5/3/2006
>
>

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com