RE: DSP & XTAL filter settings?
Posted by
Dan Barker on
May 09, 2006; 2:41pm
URL: http://elecraft.85.s1.nabble.com/DSP-XTAL-filter-settings-tp389470p389474.html
It's still going to matter, if you are running AGC or there are strong
nearby signals. Run your CW filter at 400Hz for any narrower DSP setting.
Dan / WG4S / K2 #2456
<snip>
Then, when I want the wider bandwidth, I'd use one of the XTAL filters with
the DSP filter set to LOPASS, and when I want the narrower bandwidth, I'd
use one of the DSP filters (and since the XTAL filters all would have wider
bandwidths,
_it wouldn't make any difference which XTAL filter is selected_ [emphasis
added]
).
</snip>
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com