Resistance Checks

Posted by BILL COCHRAN on
URL: http://elecraft.85.s1.nabble.com/Resistance-Checks-tp390233.html

I probably will be doing the resistance checks later this weekend on the K2 control board. I know another one of my questions again. I have not done resistance checks on circuit boards in many years and I have hit a wall with this. For example: the instructions say, Test Point P2 pin 1, Signal name 12V and resistance (to ground) greater than 10K. For the life of me I cant remember how to take these readings. It is probably something very easy, I just cant figure it out. I hope someone has some good instructions on how to take the readings. Thanks.

BILL COCHRAN
  BILL COCHRAN REAL ESTATE APPRAISALS, LLC
  1430 N 12TH STREET
  CAMBRIDGE, OHIO
  43725
   
  PHONE:[phone]
  FAX: [phone]
   
  AMATEUR CALLSIGN: N8PGX
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com