Re: [Elecraft] M1-M4 Quick memories

Posted by Larry K1UO on Nov 01, 2009; 1:30pm
URL: http://elecraft.85.s1.nabble.com/M1-M4-Quick-memories-tp3925899p3926972.html

Hi Julian.....MEM 0-9 is set to Band Sel     

 

 

I still go to the bands when I push M>V and the keys 1-9 to go to the programmed bands and M1 or M2 does set the saved parameters for those bands either cw or ssb....BUT...I can no longer add or make changes to the parameters stored in M1 or M2 by pressing V>M and the appropriate memory key.  I go straight to the selectable memory bank instead.

 

Hope thats clear?

 

73

Larry K1UO

----- Original Message -----

From: [hidden email]

To: [hidden email]

Sent: Sunday, November 01, 2009 7:52 AM

Subject: Re: [Elecraft] M1-M4 Quick memories

Larry K1UO wrote:

Let me try and clarify.  When I wanted to save some parameter setup on a particular band, I used V>M to save the info in the M1 or M2 keys for a quick update of band information.  Now when I use
that function all I get is memory position 00 displayed.  Nothing I do gets me back to the M1-M4  and I can no longer save my changes to each band so when I press, for example, M>V then 1 it loads the 160M setup info from the M1 or M2 keys.

Is the configuration option MEM 0-9 set to "nor" or "band sel"?

---

View message @ http://n2.nabble.com/M1-M4-Quick-memories-tp3925899p3926863.html
To unsubscribe from Re: M1-M4 Quick memories, click here.