RE: What makes K2's SSB performance less impressivethanonCW ?
Posted by
Ron D'Eau Claire-2 on
Aug 14, 2006; 7:53pm
URL: http://elecraft.85.s1.nabble.com/Up-conversion-tp392867p392885.html
Hi, David:
Hopefully, others who have first-hand experience with the Kenwood and other
commercial and desk mics make specific recommendations. I'm using a "home
brew" hand mic that has a radio shack electret element. I also changed the
input resistor (R14) on the KSB2 board from 1K to 5K. That works FB for me.
Thinking back about the posts on that subject over the years, it seems to me
that most who have used electret mics have reported good results.
Ron AC7AC
-----Original Message-----
What would be a similarly qualified desk mic recommendation?
--- David Toepfer <
[hidden email]> wrote:
> Is the Kenwood MC-43S hand mic still one of the top recommendations as
> a hand mic that fits these requirements?
>
> --- Ron D'Eau Claire <
[hidden email]> wrote:
> > As Don pointed out, it is true that the K2 requires a fairly high
> > output microphone.
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com