Login  Register

Re: A new KX1, maybe KX2?

Posted by Karl Larsen on Aug 29, 2006; 12:25pm
URL: http://elecraft.85.s1.nabble.com/A-new-KX1-maybe-KX2-tp393454p393458.html

Geoffrey Mackenzie-Kennedy wrote:
> Karl Larsen wrote:
>
>>    There are new chips that run with a 100 MHz clock.
>
> And things seem to be getting better. The Analog Devices AD9951 can I
> understand be clocked at up to 400MHz, and I hear whispers about
> higher clock frequencies.
    Hi Geof, I get the Analog Devices newsletter but have been remiss in
reading it. But this assures we can clock the AD9951 at 100 MHz and then
generate the transmit signal, and receiver first mixer signal for a 160
to 10 meter transceiver.


>
>>> The relatively high 4.9 MHz IF of the single conversion Elecraft
>>> rigs is already excellent for image rejection.
>>>
>>>
>> Not so. Ask any European user and they will talk about Broadcast
>> spurs that occur when a 350,000 Watt station is 1 hop away on the
>> Image frequency.
>
> Very true. Not much fun here looking down the throats of these
> monsters on 40m, most of whom use very big high gain antennas. The
> spurious responses above 7.1MHz in my K2's receiver cause a big
> problem during the evenings.
>
>> The latest mixers can help to stop this problem.
>
> I'll second that, particularly in the case of the H-mode mixer.
>
    I have read about the new Mixers and to be honest I do not
understand the way they work. I'm 70 years old and my hobby is getting
complicated. I last looked at double balanced mixers which seemed to be
the best around.

    Well I will place H-mode mixer in Google and see what comes up.

    This all means that the KX1 can be improved into an all HF band
radio using the DDS tools now available. I think this change takes the
KX1 out of the battery operated small physical size to something a bit
larger. But maybe not too. It might be the same box as the KX1 but with
more controls.

73 Karl K5DI

> 73,
> Geoff
> GM4ESD
>
>
>
>
>
>
>

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com