> Brian,
>
> Is the higher reflected power indicated on the K3 or is it the reading
> on a meter in the line between the amp and the antenna?
>
> If it is read on an external meter --
> Is there any possibility that something is arcing over at high power -
> check your antenna system for that condition.
>
> If the indication is on the K3, then the problem is in the input circuit
> for the amp (giving a non-50 ohm resistive load to the K3).
>
> 73,
> Don W3FPR
>
> Brian Machesney wrote:
>
>> I'm feeding a "double L" antenna on 160m (visualize a vertical dipole with
>> the top and bottom legs bent to form something like a capital "C" and fed in
>> the middle of the vertical leg). The SWR bridge on the K3 shows 1:1 SWR, but
>> when I fire up my Alpha 91B, I see significant reflected power.
>>
>> I recently saw a post on the topband reflector from another K3 owner whose
>> 160m output power is being reduced from 100W to 50W by the K3 even though
>> the SWR reads 1:1 on the K3's internal SWR bridge.
>>
>> Has anyone else seen this or have an explanation for it?
>>
>>
>>
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html>
>