Re: Elecraft
Posted by
Don Wilhelm-4 on
Nov 07, 2009; 8:08pm
URL: http://elecraft.85.s1.nabble.com/M1-M4-Quick-memories-tp3925899p3965509.html
Larry,
If your ProSet has the HC-5 element, it is NOT a ProSet K2. The ProSet
K2 is only sold through Elecraft AFAIK.
ALL ProSet K2s have an electret element. That is why you need bias
turned on in the K3 and for the K2 the bias resistor at the microphone
jack is needed.
All ProSets work nicely with the K3. If it is the ProSet K2 or the
ProSet iC, then bias needs to be on, but for the others bias should be
off. They can be plugged into the front mic jack with a Kenwood
adapter, or plugged into the rear panel jacks with no adapter required.
73,
Don W3FPR
N1JM wrote:
> I have an older Pro Set K2 which I 'm quite certain has a Heil HC5 element in
> it. I noticed the new one has a iC element. I dont think there is anything
> special about it other than the mic adapter is wired for the Elecraft front
> panel, otherwise it's a Pro Set. On the K3, you can plug the mic/headset
> connectors directly in the back without an adapter.
>
>
>
> Larry - K2GN wrote:
>
>> My Heil Pro Set is old and getting beatup.
>> I'm beenn going to sent it to the Heil Hospital to get it refur'ed'
>> But then I saw the Pro Set K2 on the web site.
>> Any body using one on a K3, as well?
>> Thanks in advance.
>>
>> de K2GN/Larry
>> K3 - S/N 3278
>>
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html