Re: W2 review

Posted by Mike Harris on
URL: http://elecraft.85.s1.nabble.com/W2-tp4000196p4001399.html

G'day,

<snip
> There are four cover holes where you're instructed to remove
> the paint from the area around them so the stand-offs can
> make a good ground connection.  The paint is tough, and
> requires hard scraping to remove.  A small scrap of masking
> tape over the four areas before painting, as in the case of the
> K2's panels, would have helped.
<snip

Yes, it was disappointing to read this in the manual, however,
everything since the base K2 has had the same requirement.  I guess
there must be a reason for the lack of masking tape.

Regards,

Mike VP8NO


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html