Re: W2 review

Posted by Grant Youngman on
URL: http://elecraft.85.s1.nabble.com/W2-tp4000196p4001482.html


On Nov 13, 2009, at 2:45 PM, Mike Harris wrote:

>>
>> make a good ground connection.  The paint is tough, and
>> requires hard scraping to remove.  A small scrap of masking
>> tape over the four areas before painting, as in the case of the
>> K2's panels, would have helped.
> <snip
>
> Yes, it was disappointing to read this in the manual, however,
> everything since the base K2 has had the same requirement.  I guess
> there must be a reason for the lack of masking tape.

It's a kit.  Since you don't have the joys of inhaling flux fumes, you get to scrape :-)

Grant/NQ5T
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html