Posted by
Guy, K2AV on
URL: http://elecraft.85.s1.nabble.com/CW-Reverse-tp4008302p4008813.html
CW reverse is "USB" listening, CW is "LSB" listening. Personally I put that
choice in the same bucket as Microsoft's backward slash but Rev=USB is
consistent on all bands on the K3 (reverses necessarily on the K2). I like
for the higher pitched audio to be the higher frequency on CW.
Assuming you know how to reverse the mode on the K3 front panel, and this is
a N1MM logger thing, click on "config" in the main menu bar, and uncheck
"Use Reverse CW" on the "Other" tab. Checking this will keep resetting the
K3 to CW Rev when going to a spot, and at the same time reposting this
choice over and over to the K3's memory of your last choice.
I don't think the K3 ever changes this setting by itself. It's just
remembering the last setting used by the external intelligence setting
things, be it human or program.
I think the equivalent of this reset is in some number of programs using the
K3's serial interface for automatic control. You'll need to check those.
On Sun, Nov 15, 2009 at 12:31 PM, Tony McClenny <
[hidden email]> wrote:
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html