Posted by MontyS on URL: http://elecraft.85.s1.nabble.com/Help-Re-K3-dead-internal-keyer-tp4012938p4013476.html
Are you hearing the dots and dashes in the K3 receiver's audio? If not,
perhaps the monitor level has been changed and there is no audio to key the
vox circuit.
Monty K2DLJ
.
> Kurt Wiksten wrote:
>> No CW
>> transmission. Not a single dit or dah. I drove home and have now tested
>> the bencher
>> into my Winkey and all works fine, but moving the manipulator to the
>> paddle jack on the
>> K3 is not producing any CW. What has happened and why??? What am I
>> missing?? Any ideas
>> is most welcome!!
>
> Make sure that VOX is on.
> --
> 73,
> Vic, K2VCO
> Fresno CA
> http://www.qsl.net/k2vco > ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] >
> This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html