Re: W2 connection problem
Posted by
David Fleming-2 on
URL: http://elecraft.85.s1.nabble.com/W2-connection-problem-tp4060656p4060710.html
Are you selecting the correct COM port from the W2 Utility 'Port' page?
David, W4SMT
--- On Tue, 11/24/09, NZ0T <
[hidden email]> wrote:
> I have no problem connecting to my W2 using the utility
> directly thru my
> laptops port but when I try to use my virtual ports
> emulator (from
> Eterlogic.com) I can't get it to work. It says it is
> sending and receiving
> ";" but doesn't do anything else. This port emulator
> program works great
> with my K3 allowing me to run AcLog and K3_EZ at the same
> time using one
> port with a usb/serial adapter. The settings I have
> in the port emulation
> program are:
> Speed 9600
> DTR/RTS NO
> Parity no
> Bits 8
> Stop bits 1
> Read/Interval Timeout -1
>
> I would like to be able to run AcLOg and the W2 computer
> display at the same
> time when it becomes available. Any ideas on what I'm
> doing wrong? Go slow
> - I'm computer stupid!
>
> 73 Bill nz0t
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html