Re: W2 connection problem - NZ0T Comment
Posted by
NZ0T on
URL: http://elecraft.85.s1.nabble.com/W2-connection-problem-tp4060656p4061434.html
Hi Dan,
I am using this emulator program:
I use it to run two seperate programs from one
port. The program allows me to create a seperate virtual port. I am
using actual port 5 and I have created a virtual port 9 which can share
applications. The connection to the W2 is a Dynex DX-UBDB9 USB/serial
adapter thru the Elecraft supplied serial cable directly to the W2 serial
connection.
Hope this helps.
73 Bill nz0t
----- Original Message -----
Sent: Tuesday, November 24, 2009 3:32
PM
Subject: Re: W2 connection problem - NZ0T
Comment
Bill,
Will you clarify something for me?
You
mentioned a terminal emulator. If I understand you correctly, with this
emulator, you can run two separate applications (a logging program and the
K3 utility) at the same time. ...and that both of these applications
are
accessing and controlling the K3 at the same time via it's serial
port. Is
this correct?
My second question concerns the W2.
How is the computer connection made to
the W2? Is it not made
directly to the W2? What cable goes where?
Thanks,
Dan -
W4TQ
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html