K3 mods

Posted by Steven.Zabarnick on Dec 04, 2009; 5:57pm
URL: http://elecraft.85.s1.nabble.com/K3-mods-tp4113962.html

Yesterday I overcame my fears :-) and successfully performed the  
following mods on my K3 (S/N 1672):

K3 AF Mod (Line out & speaker)
IF Output Buffer Gain Mod
K3 Extreme Signal RX Protection Mod

But, I was not able to perform the K3 AF Output Mod (two 470 ohm  
resistors on the KIO3 board). I found it impossible to hold the  
resistor in place will soldering to the connector pins. Does anyone  
have any suggestions on techniques for installing these resistors?

Steve N9SZ

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html