Login  Register

Re: K3 Receiver Noise Level -- Evaluation and Adjustment

Posted by Mike Reublin on Dec 18, 2009; 9:30pm
URL: http://elecraft.85.s1.nabble.com/K3-Receiver-Noise-Level-Evaluation-and-Adjustment-tp4187070p4188976.html

Wayne -

Could you explain the MDS test in greater detail? My AFV (AGC-S, ATT
off, no sub reciever) value bounces all over between 18 and 62, with
most values in the mid 20's. Over a 5 minute period, it doesn't
stabilize. I don't know what that means.

73, Mike NF4L

Wayne Burdick wrote:
> 7. If you still feel that noise level is too high, try doing an MDS  
> (minimum-discernable signal) test to see if the receiver is meeting  
> spec. You can use your own signal generator or an Elecraft XG1 or XG2,  
> in conjunction with the K3's built-in true-RMS AF voltmeter (see  
> alternate VFO B display modes in the owner's manual).
>
> 73,
> Wayne
> N6KR


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html