Posted by
Evert Bakker (PA2KW) on
Dec 20, 2009; 11:29am
URL: http://elecraft.85.s1.nabble.com/K3-and-MicroKeyer-MKII-tp4194350.html
I'm trying to connect my K3 to the MicroHam MKII.
I'm struggling already for two weeks now to let the MKII to stop putting my
K3 into TX mode (unwillingly).
When I switch on the K3 and the MKII (both on a different power supply)
nothing goes wrong so far.
But as soon as the router is started, it starts to put the K3 in "pulsed" TX
(each +/- 1.5 sec a TX pulse)
If I pull the CAT (DB-9) cable from the K3, it stops.
I got the idea that there was some relation between TX pulsing and polling
the K3 for info
I did contact MicroHam support, did get prompt answers, but it's still not
solved (yet).
When I delete the device and create a new one (PORTS tab - SET - and select
the K3) the problem is gone.
I did set the communication speed at 4800 Baud as suggested by MicroHam
support.
I have no other application running which generates audio and might
interfere with the MKII (I think..)
I'm really puzzled.
I thought I might give it a try here.
If you feel it's OT, contact me direct.
73's, Evert PA2KW
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html