Re: W2 interface program problem

Posted by ayoshida on
URL: http://elecraft.85.s1.nabble.com/W2-interface-program-problem-tp4206524p4206748.html

David

Thanks.

(1)Yes FW ver0.94 fix SWR meter problem.
(2)Regarding intermittent transmitting
 If plug off USB connector from RigExper Plus unit then the problem
disappears.
So I try to check again with another CAT interface. (microHAM CWKeyer and
microKeyer)
PTT-Key setting does not change behaviour. Even if plug off PTT plug
from K3 I see the problem.

73
aki  ja1nlx

David Fleming wrote:

>> (1)SWR meter ALWAYS show the last SWR measured. not cleared
>> out.
>>    
>
> This problem was fixed in firmware version 0.93. Use the W2 Utility to update firmware to current version (0.94).
>  
>  
>> (2)When clicking Setup button my K3 repeat transmitting
>> intermittently untill it opens Ssetup window.
>>    
>
> I cannot re-create this. Are you using Windows or Mac? Please tell me more about your setup - do you have any software running to control K3 when this problem occurs? See if changing the setting of CONFIG:PTT-KEY changes the behavior.
>
> tnx,
>
> David, W4SMT
>
>
>
>  

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html