Posted by
Gary Hinson on
Dec 26, 2009; 9:52pm
URL: http://elecraft.85.s1.nabble.com/K3-Carry-on-Pelican-1510-tp4218893p4218934.html
> If I am going to carry the radio onto the plane again, I
> would get a case
> that's not so heavy - it only has to be protected from the
> other passengers
> cases, and no bouncing around in flight.
I used a shiny alumin[i]um "flight case" meant for transporting camera and electronics gear, from a
local shop. It is 18x13x6" externally. The pluck-out high density foam inside is a fairly tight
squeeze for the K3, so it is snug and well supported.
Small & light enough for hand baggage, and strong enough to risk being put in the hold if the
airline people at the gate ever insist it can't go on board.
Try your local electronics or camera shops. Much cheaper than a Pelican too.
I was surprised to have no problems with it at the airport security scanners travelling from ZL to G
to 9L and back, though I did have my amateur license in my carry-on backpack just in case they were
curious.
Also suits the K2 (instead of, not as well as the K3!), leaving space for Palm paddle, antenna wire,
switchmode PSU etc. See my "K2 suitcase set" at:
http://www.g4ifb.com/html/elecraft_k2_k3.html#K273
Gary ZL2iFB
K3 #2887 K2 #1770
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html