Re: K3 DIY DSP Rev D - please elaborate

Posted by Don Wilhelm-4 on
URL: http://elecraft.85.s1.nabble.com/K3-DIY-DSP-Rev-D-please-elaborate-tp4238598p4240999.html

David,

Yes, that answers it about the DSP board upgrade - there will be a note
there if there is a hardware change that requires updated firmware to
realize the upgraded function.  Normally, the firmware is "backwards
compatible" meaning that the updated firmware will run on K3s without
the hardware upgrade.
I was really commenting to the gentleman who seemed to be having a
problem locating documentation about what was included in each firmware
release (upgrade) - perhaps I misunderstood his question (statement?).

73,
Don W3FPR

David Lankshear wrote:
> By firmware release notes, do you mean the comments associated with the order for the K3DSPUPGD, Don?  If that's a yes, then this should settle matters because it says:
>
> "Improves low freq RX/TX audio response below 300 Hz, and adds a Low Pass Filter (LPF) that rolls off RX audio above 4 kHz."
>
> Thanks for your guidance on this, Don.  A Happy New Year to you and to all on the reflector.
>
> 73  DaveL  G3TJP
>  
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html