Re: QRP K2 10m power output
Posted by
Leigh L. Klotz Jr WA5ZNU on
Jan 29, 2007; 11:23pm
URL: http://elecraft.85.s1.nabble.com/QRP-K2-10m-power-output-tp443368p443369.html
I had a problem with low output on the high bands that I traced to a
missing C150 (bottom board part) in the buffer amp before the XMIT
mixer. Output was OK up to about the middle of 20m.
Your symptoms sound different, but what I found is that a loss in one
part of the distributed gain can be made up somewhere else with the ALC,
so you might check for missing components all along the transmit chain.
73,
Leigh/WA5ZNU
P.S. I just happened to have a spare C150 left over after I built my K2,
so I used that one to fix it. Imagine that...
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com