Re: [Elecraft] W2 assembly

Posted by w8fn on
URL: http://elecraft.85.s1.nabble.com/W2-assembly-tp4434082p4437928.html

I'm not sure whether you need to remove paint on the inside or the
outside of the panel surface to assemble the W2. If it's an "inside"
job where looks don't really matter, if you have access to a really
large drill bit (say 1/2" or better) you can simply center it in the
hole and twirl it a couple of times. This will remove the paint, and
a bit of metal, around the periphery of the hole. This technique also
works well as a quick and dirty deburring tool for holes drilled in
sheet metal.

73...
Randy, W8FN

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html