RE: KPA100 R12 Voltage query
Posted by
Don Wilhelm-3 on
Feb 26, 2007; 1:08am
URL: http://elecraft.85.s1.nabble.com/KPA100-R12-Voltage-query-tp444220p444222.html
Les,
It may or may not be a problem. You should turn to the DC voltage chart and
measure the DC voltage on each of diodes D1 thru D8. If all of the voltages
are roughly 10% low, it is not a problem, but if you have a bad diode, or
one of them oriented the wrong way, the variation will be much more than
10%.
73,
Don W3FPR
> -----Original Message-----
>
> I have just got around to building the KPA100 (to Appendix G -
> Rev. C-5) for
> my K2 (53 * * ), and I have got to the voltage test on R12, on page 47 of
> the manual, where it asks to verify that the voltage is within the
> 100 -110VDC range. Upon performing this check, mine can only
> manage 91V, Is
> this OK or do I have a problem?.
>
> 73,
> Les M0BSI
>
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.446 / Virus Database: 268.18.3/700 - Release Date: 2/24/2007
8:14 PM
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com