Posted by
Tom Hammond-3 on
Mar 17, 2007; 4:06pm
URL: http://elecraft.85.s1.nabble.com/Toroids-tp444595p444604.html
Hi Brett:
>I got my front panel board done today, and
>started on the RF board.
>
>So far all seems good, very easy to build, at least
>so far....
>
>In case anyone is wondering, they are up to SN 6065!
>
>I have read a bit here about setting up the filters, and
>it being critical, and you need the spectrogram software.
>Well, it seems to me if you need that to set the
>rig up so it works correctly, it should be included
>with the kit?
You don't "NEED" Spectrogram, but it does help quite a bit.
The last shareware version of Spectrogram (v5.1.7) is available
at www.n0ss.net. You can find it on both the K2- and K1-specific
pages of this site, along with K2- and K1-specific PDF documcents
for ease of using it.
>Would a spectrum analyzer help?
>I have a nice HP 8592l that I used on the homebrew receivers,
>could I use it on the K2 to set the filters up?
I'm sure you could use it as well. But you'll have to get info
from someone else. I've never had an opportunity to use a real
spectrum analyzer in that use.
73,
Tom Hammond N0SS
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com