Posted by
chris meagher on
Mar 30, 2007; 2:25am
URL: http://elecraft.85.s1.nabble.com/query-on-power-readout-tp445210.html
Hello there from VK,
I am investigating severe loss of TX power on my K2.
With 5W set, I get almost no power, the RF detector input measured with
the RF probe/DMM shows 0.009V.
however, the display reads approx. 5W out.
The reading on pin 2 of U8 on control board is 0.55V.
This would suggest to me that U8 is trying to deliver maximum power,
which is what it ought to do if only 0.009V is seen at the detector.
All detector components seem to be OK.
What I don't understand is how the LCD is reading 5W on transmit.
Other TX RF measurements (with SSB board still installed, rig set on CW
mode)
Q6 base = 0.021V
Q6 collector = 0.88V
Q7 base = 0.089V
Q8 base = 0.108V
(would have expected Q7 & 8 to be the same)
Receive and menu functions all appear normal.
Any ideas welcome, or advice as to where to look next.
Chris K23666
Chris Meagher
VK2LCD
PO Box 61
Woodburn NSW 2472
Australia
Nearest town: Evans Head
HF Rig: Elecraft K2
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com