Posted by
Jack Smith-6 on
May 03, 2007; 8:09pm
URL: http://elecraft.85.s1.nabble.com/8-pole-vs-5-pole-I-knew-this-would-happen-tp446796p446799.html
One more data point on the term "roofing filter."
I have a copy of the June 1981 RSGB Radio Communications magazine that
reviewed Drake's TR7.
It describes the design as follows:
"A low-noise, wide-dynamic range amplifier is used at 48.05 MHz to
precede the 10-KHz wide roofing filter."
Leaving aside the RSGB's odd use of hyphens, it describes the filter as
a "roofing filter" although Drake does not use the term in its technical
manual.
Is it the case that "roofing filter" is UK terminology that has made its
way to the US side of the pond only recently?
Jack
Geoffrey Mackenzie-Kennedy wrote:
> Just cannot resist saying this Jack, the term "roofing filter" has
> certainly been around for a long time - close to 50 years I believe,
> possibly longer. I think that I first ran across the term being used
> to identify the first IF filter in an Independent Sideband Receiver
> which the company for whom I worked manufactured for HF Point-to-Point
> applications in the very late 1950's, along with companion high power
> ISB transmitters.
>
> Perhaps some other term might be less confusing and prevent any misuse
> of the term , but don't let us change from "roofing filter" now!!
>
> 73,
> Geoff
> GM4ESD
>
> Jack Smith wrote:
>
>
>> The term "roofing filter" has been around a long time, at least 20
>> years.
>>
>> Usually used in the context of up-converting receivers, where the
>> first IF is 40.455 MHz, or 45.000 MHz or even higher. The term means
>> the first selective filter in the receiver. If the first IF is > 30
>> MHz, the roofing filter is generally wider than one normally needs
>> for SSB or even AM, and the receiver's ultimate selectivity is
>> provided in a later IF stage.
>>
>> As to why it is called a "roofing" filter, I imagine it derives from
>> the fact that it puts a "roof" over the receiver's selectivity.
>
>
> _______________________________________________
> Elecraft mailing list
> Post to:
[hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>
http://mailman.qth.net/mailman/listinfo/elecraft
> Help:
http://mailman.qth.net/subscribers.htm> Elecraft web page:
http://www.elecraft.com>
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com