Re: Unable to resolve apparent S-meter noise level on K3 with AGC on

Posted by Laurent F6DEX on Jan 31, 2010; 7:07pm
URL: http://elecraft.85.s1.nabble.com/Unable-to-resolve-apparent-S-meter-noise-level-on-K3-with-AGC-on-tp4488538p4490546.html

Lance,

Something I forgot. If your smeter is calibrated with preamp OFF (as required), set CONFIG: SMTR MD = ABS so you have same reading with PRE ON. Eventually, this may help...

73, Laurent