Posted by
Doug Faunt N6TQS +1-510-655-8604 on
Jun 18, 2007; 5:21pm
URL: http://elecraft.85.s1.nabble.com/YAQ-Yet-Another-K3-Question-tp449289p449308.html
Given the increasing difficulty of producing a 45 baud 5 bit code,
having translation both ways in the K3 would be useful, even with a
computer attached.
And the K3 has what I expect to be a reasonably capable CW decoder,
too. In any case, if the output of the decoder can be sent out the
serial port, a larger display would be pretty simple.
The capability of sending decoded data out the serial port would be
most useful.
73, doug
Date: Mon, 18 Jun 2007 17:42:17 +0200
From:
[hidden email]
Hi Greg,
> I don't think so as there is no way to ...
> ... soundcard program that will allow you to do this?
Why would I want to use a soundcard program if I've got a good demodulator
(RTTY, PSK) in the K3?
I would have thought that the K3 can send demodulated data via the
RS-232 to the computer and the computer would be able to send plain
ASCII to the K3 for data mode transmission.
If the K3 can not do this, I would vote that this should be on the future
feature list.
vy 73 de toby
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com