Login  Register

Re: Firmware upload problem

Posted by Don Wilhelm-4 on Feb 06, 2010; 8:52pm
URL: http://elecraft.85.s1.nabble.com/K3-in-a-cw-pileup-needs-work-tp4523884p4526894.html

My opinion --
Since Joe W4TV is an authority on microHAM gear, I would say "use it at
your own peril" if you insist.  Yes, there have been reports of success,
but Joe says IT IS NOT SUPPORTED!  Please do not complain that you broke
your K3 with a firmware load when you used the microHAM router., just
get a good serial port (preferably hardware), follow the steps in the
K3Utility help file and do a proper reload.

73,
Don W3FPR

Ruben Navarro Huedo wrote:

> You can use microHAM, but you have to select:
> No radio and dissable router queries in the microHAM software.
>
>
> El 06/02/2010 21:21, Joe Subich, W4TV escribió:
>  
>>    
>>> I'm using the Microham router software to talk to the K3 and this has
>>> been working great until now.
>>>      
>> DO NOT use microHAM Router to upload firmware to the K3.
>> It IS NOT SUPPORTED.  Find a computer with a hardware
>> serial port or a dumb external USB to serial converter.
>>
>> 73,
>>
>>     ... Joe, W4TV
>>
>>
>>
>>
>>    
>>> -----Original Message-----
>>> From: [hidden email]
>>> [mailto:[hidden email]] On Behalf Of W4CCS
>>> Sent: Saturday, February 06, 2010 11:15 AM
>>> To: [hidden email]
>>> Subject: [Elecraft] Firmware upload problem
>>>
>>>
>>> Attempted to upload new firmware to the K3 this morning and
>>> got the "MCU
>>> LD" error. Now the K3 is basically dumb. In the manual, it says to
>>> unplug the power for 5 seconds, Hold the power button for
>>> approximately
>>> 10 seconds and then re-load the firmware.
>>>
>>> My problem is that I can no longer get the computer to talk to the K3
>>> and therefore cannot attempt a re-load.
>>>
>>> I'm using the Microham router software to talk to the K3 and this has
>>> been working great until now.
>>>
>>> Question, does the K3 keep the old settings (38400, 8, N, 1)
>>> or does it
>>> resort back to the default settings which are ??
>>>
>>> I also tried a direct cable (straight and null modem) and
>>> cannot get any
>>> communication to occur.
>>>
>>>
>>> I'm stuck until I get the K3 talking to the computer again..
>>>
>>> HELP..!!
>>>
>>> de W4CCS
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:[hidden email]
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>>      
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>    
>
>  
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 9.0.733 / Virus Database: 271.1.1/2671 - Release Date: 02/06/10 02:35:00
>
>  
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html