Re: K2: winding T5
Posted by
Don Wilhelm-4 on
Feb 08, 2010; 2:12am
URL: http://elecraft.85.s1.nabble.com/K2-winding-T5-tp4531587p4531953.html
LS,
I don't understand your confusion - the lead numbers are clearly
silkscreened on the board, just match them up.
If the silkscreen on your board is sub-standard, refer to the parts
placement diagram at the back of the manual or the board images
available at Tom Hammond's website www.n0ss.net.
For 'beauty', orient it with the yellow side up.
73,
Don W3FPR
lstavenhagen wrote:
> Hi Don,
>
> Ok, thanks.
> So which way should it go in? I.e. should leads 1 and 3 be where the last
> winding of the 4-turn (lead 3) be the side where it's between turns 6 and 7
> of the 16 turn coil or the side where it's between 7 and 8 (and the inverse
> for leads 2 and 4)? It's different depending on how I have the xformer
> flipped. Also, why isn't this specified?
> Looks like most of the rest of the transformers have this situation and I
> don't see the orientation specified for those either.
>
> Thanks,
> LS
>
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 9.0.733 / Virus Database: 271.1.1/2673 - Release Date: 02/07/10 02:22:00
>
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html