Re: K2 IF amplifier output fault
Posted by
Alan Ibbetson on
Oct 07, 2007; 10:44pm
URL: http://elecraft.85.s1.nabble.com/K2-IF-amplifier-output-fault-tp454319p454325.html
In message <001601c80917$5639de70$2101a8c0@PCRoelof>, Roelof Bakker
<
[hidden email]> writes
>Hello Alan,
>
>I had also a problem with low output.
>It appeared that I had installed a 1800 pF capacitor instead of 180 pF
>at C182.
>
>Have you checked this capacitor?
Roelof,
Thanks for your suggestion. C182 is marked "181" as expected. I removed
it and measured its value. It is 176pF.
So that's not it. Next test is to remove D40 and D41 as suggested by
Don.
--
Cheers,
Alan G3XAQ
[hidden email]
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com