Re: HI CUR question

Posted by Stephen W. Kercel on Oct 09, 2007; 4:42am
URL: http://elecraft.85.s1.nabble.com/HI-CUR-question-tp454370p454371.html

Larry:

Any chance your supply voltage is running low?

73,

Steve Kercel
AA4AK


At 08:01 PM 10/8/2007, Larry  Naumann wrote:

>I sometimes get a HI CUR warning on my new K2. I have the high
>current set at 2.5 amps. My power supply is steady but on 40 meters
>when the SWR is slightly high but below 2:1, I get a HI CUR when
>running 10 watts out. Into a good 50 ohm dummy load I get 2.02 amps
>on 40 meters.
>  I've double checked my output filter tuning and all is good.
>Is this something to be concerned about or is this in the normal
>range of xmit current at 10 watts?
>Larry Naumann  N0SA
>_______________________________________________
>Elecraft mailing list
>Post to: [hidden email]
>You must be a subscriber to post to the list.
>Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft
>
>Help: http://mailman.qth.net/subscribers.htm
>Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com