Posted by
k4tmc on
Dec 20, 2007; 9:12pm
URL: http://elecraft.85.s1.nabble.com/K3-operating-tip-Viewing-and-manually-adjusting-ATU-L-C-settings-tp457283p457290.html
David,
Not to worry...I am sure someone will develop a mod to change the BL2
to a BL3.
73,
Henry - K4TMC
-----Original Message-----
From: David Ferrington, M0XDF <
[hidden email]>
To: wayne burdick <
[hidden email]>
Cc: Elecraft Reflector <
[hidden email]>
Sent: Thu, 20 Dec 2007 3:21 pm
Subject: Re: [Elecraft] Automatic 1:1/4:1 Balun switching under K3
control?
I just bought a BL2 with my K3 - why wasn't there a BL3 then!
HiHi
I'd be interested, especially if the KAT3 worked the relay when tuning
too
On 20/12/07 20:00, "wayne burdick" <
[hidden email]> sent
> You've also given me an idea for a "BL3": Same as the BL2 but with a
> relay rather than a switch for selecting 1:1 vs. 4:1. We could then
use
> one of the K3's spare output lines (say DIGOUT1) to switch the relay
> under firmware control, per-band. There would be one wire running from
> the AUX I/O connector to the BL3, and you'd need to power the relay
> from the K3's switched 12 VDC accessory output.
>
> If this is of interest, I'll ask the BL2's designer to take a look at
> it. I have the same problem myself, so I already want two :)
--
DonŒt complain. Nobody will understand. Or care. And certainly donŒt try
to fix the situation yourself. ItŒs dangerous. Leave it to a highly
untrained, unqualified, expendable professional.
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com________________________________________________________________________
More new features than ever. Check out the new AOL Mail ! -
http://webmail.aol.com_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com