Re: K3 question/problem
Posted by
dj7mgq on
Dec 31, 2007; 11:28pm
URL: http://elecraft.85.s1.nabble.com/K3-question-problem-tp457849p457855.html
Hi Cary,
> I hesitate to put this question on the reflector
This what the reflector is for!
> apparently my signal is about 500 hertz higher
You ought to double check which filters you have set up for TX for each
mode. It sounds to me as if you might have a small fubar in your filter
settings. When in doubt, use the 2.7kHz (or the 2.8khz, as the case may
be) for all modes apart from AM. Here you need to use the 6kHz filter,
if you have it.
Also double check that you do not have + and - mixed up on the filter
offsets. AFAIK no filter offsets are needed for the 8 pole filters.
Happy New Year.
toby
--
DD5FZ (ex 4n6fz, dj7mgq, dg5mgq, dd5fz)
K2/10 #885
K2/100 #3248
K3/100 #67
DOK C12, BCC, DL-QRP-AG, JN58td
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com