sub RX ant source shared with Main = no RX?

Posted by Zoli Pitman HA1AG-2 on
URL: http://elecraft.85.s1.nabble.com/K3-and-the-subreceiver-tp4593879p4599372.html

Hello,

If I select SUB-RX Ant source Main instead of AUX, it does not rx anyting. When I select AUX it works fine from the AUX. According to the manual The K1 relay should be engaged then sharing the Main ant between the two RXs (latest manual page 42 fig 2). When I change it to Aux it receives fine from that port.

K3/100 nr 3636 with KXV3A, no ATU, with latest SW revisions.

CONFIG:KR3A is Ant-BNC, changing works vis BSET-ANT.

Any ideas, pse? I can't imagine this is a real bug.

73, zoli ha1ag


     
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html