Re: headset question
Posted by
Don Wilhelm-4 on
Feb 24, 2010; 4:56am
URL: http://elecraft.85.s1.nabble.com/headset-question-tp4623692p4623766.html
Paul,
You have it right - just plug it in, assuming that the footswitch plug
matches the K3 jack - the headphone/mic connectors will plug right into
the rear K3 jacks. Don't forget to set the Mic to rear and the bias on
for the CM500.
73,
Don W3FPR
Paul Milward wrote:
> Hi guys,
> I recently ordered a K3 and eagerly await it's delivery. You will likely hear lots more from me as I attempt to get up to speed with it.
>
> I have been reviewing the archives of this group and see that the Yamaha CM500 is highly regarded. I plan to purchase one very soon.
>
> I have the K3 manual open to page 17 (the pdf from Elecraft website). It looks like the stero headset plug goes into the jack marked "phones', the mic plug goes into the jack marked "mic" and a foot switch plug goes into the jack marked "PTT IN"
>
> Now for my question. I have a Heil footswitch and plan to use it for PTT. Is the configuration I described correct? If not, how is headphone/mic and footswitch connected?
>
> TIA and 73
>
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html