Re: KBPF3 Query
Posted by
n7ws on
URL: http://elecraft.85.s1.nabble.com/KBPF3-Query-tp4639813p4639997.html
In this case, I just key it in. The band will change to 30-meters and if you cycle through the bands, the next time you hit 30-meters you will be set to 9 MHz.
BTW, I have my M1-M4 memories set to "default" frequencies for each band so that M1=CW, M2=SSB, M3=Data A (PSK) and M4=AFSK-A (RTTY). So when I get some oddball frequency/mode set on a particular band, I can quickly recover to a known state.
Wes N7WS
--- On Fri, 2/26/10, Brian Alsop <
[hidden email]> wrote:
> Guys,
>
> I was wondering just how this works. Suppose one
> wants 9 MHz. Does one
> set the band to 30M and just tune down to it? Does
> any of this confuse
> the band selection via
> buttons? Alternatively if one sets the
> frequency with the key pad, what "band" does it appear in.
>
> I seem to recall some unintended consequences reported here
> a long time ago.
>
> 73 de Brian/K3KO
> ______________________________________________________________
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html