Re: K3 PA Power Loss with Subreceiver Install

Posted by Don Wilhelm-4 on Apr 05, 2010; 12:54am
URL: http://elecraft.85.s1.nabble.com/K3-PA-Power-Loss-with-Subreceiver-Install-tp4851801p4851802.html

Dave,

The first thing to try is to push the reset button on the back of the K3.

73,
Don W3FPR

Ipman IP wrote:
> I installed the KRX3 (Subreceiver) to K3 S/N 3788 last night and it appears to work fine
> (I completed all of the software steps in the manual) but I now have very little RF output when connected to a dummy load. The 100w PA doesn't appear to kick in when the power is increased above 12 watts; there is only one bar displayed on the power output
> meter. The ATU relays click when activated but no SWR value appears.
>  
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html