Posted by Brett Howard on Apr 29, 2010; 4:24am URL: http://elecraft.85.s1.nabble.com/K2-PSK-31-Power-Settings-tp4975238p4978272.html
4-5 bars of ALC is essentially the point where the ALC will begin to
engage and is thus the same thing as what Don is referring to.
~Brett
On Wed, 2010-04-28 at 21:52 -0600, Bob Cunnings wrote:
> On Wed, Apr 28, 2010 at 8:14 PM, Don Wilhelm <[hidden email]> wrote:
>
> > but the K2 (and K3) control the output level prior to the balanced
> > modulator, and will have trouble if used that way. Set the power to the
> > level that is desired and then adjust the audio for no ALC for digital
> > modes.
> >
>
> Except for the K3 which requires that audio be set for 4-5 bars ALC
> for digital modes.
>
> Bob NW8L
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] >
> This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html