Re: Antistatic work mat

Posted by Pete Smith N4ZR on Jun 03, 2010; 10:05am
URL: http://elecraft.85.s1.nabble.com/Antistatic-work-mat-tp5132848p5134493.html

Hmmm ... before building my K3 (just finished), I bought a wrist strap
and mat from Cables Unlimited at under $25 for both.  Aside from cables
that are a little too short, them seem fine  So long as there is a wire
with a 1-megohm resistor between a conductive mat surface and common
ground, what is to distinguish a "good" mat from one that won't really
provide the protection?

73, Pete N4ZR

The World Contest Station Database, updated daily at www.conteststations.com
The Reverse Beacon Network at http://reversebeacon.net, blog at reversebeacon.blogspot.com


On 6/2/2010 6:22 PM, Bill Myers wrote:
> I'm about to order the K3.  I have an antistatic mat that I used to build the
> K2 (#1760 - wow! that long ago?).  Although it carries a few solder burns,
> it still looks to be in good condition.  I wonder if I should rely on it to
> assemble the K3, or should I spend the 50 bucks and buy a new one?  Any
> advice?
>    
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html