Re: K3 Memory Recall

Posted by Mike K2MK on Jun 26, 2010; 3:15pm
URL: http://elecraft.85.s1.nabble.com/K3-Memory-Recall-tp5225405p5225458.html

Hi Tom:

I troubleshoot peculiar K3 occurrences in this order.
1. Operator error
2. Computer error
3. K3 error

It sounds like item 1 is ok. Move to item 2. Turn off any logging program or better yet disconnect the serial cable.

73,
Mike K2MK

Tom Boucher wrote

Can anyone throw any light on the following way in which my K3 has always behaved?

Using memories 00 - 09 as if they were band switches: Config: Mem 0-9 : Band Sel
Memories 00 - 09 are each set up on a frequency in each band using the V>M button.
Tap M>V button, then select a memory either by rotating VFO A or by tapping buttons 0 - 9, then tap M>V again.
Band is selected correctly but VFO A is locked up and won't change frequency until another button is pushed (e.g. Freq Ent, Fine or Rate)

It's not a major problem but am I doing something wrong?

73
Tom G3OLB
K3 S/N: 01434 with FW v. 3.97
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[e-mail]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html