Posted by
ussv dharma on
Jul 15, 2010; 7:36pm
URL: http://elecraft.85.s1.nabble.com/K3-S-Meter-behavior-tp5295728p5298980.html
Aloha Peoples:
being raised in "tube type" electronics I do not profess to understand solid state beyond the "hole " theory. Thus, I REALLY DON'T CARE WHAT THE RECEIVER/ANTENNA DOES TO THE SIGNAL...the main thing is that I can hear you and understand what you are saying.
Is it "arm chair copy"? Do you have an "old time 75 meter bodacious" signal?
Bottom line, It all does not matter as my antenna/receiver/filter/hearing aid/ear combination effects the received signal that I just cant say how strong your signal is....now, if I had a station equipped with all the lab equipment I want, perhaps then I could tell you your 'RELATIVE' signal strength.
my last post on this subject.
Grandmaw Susan
If you don't change direction you WILL arrive exactly where you're headed!! Susan Meckley, Skipper W7KFI-mm AFA9SM USSV DHARMA
--- On Thu, 7/15/10, Tom W8JI <
[hidden email]> wrote:
> From: Tom W8JI <
[hidden email]>
> Subject: Re: [Elecraft] K3 S Meter behavior
> To: "drewko" <
[hidden email]>, "The Smiths" <
[hidden email]>
> Cc:
[hidden email]
> Date: Thursday, July 15, 2010, 6:27 AM
> > Personally, I would prefer that
> the s-meter not operate in this way in
> > ABS mode. RF Gain should have no effect on the s-meter
> action when in
> > ABS mode, just as ATT and PRE do not.
>
> It would probably screw up (highly technical term) how the
> system works, or
> require a separate receiver just for the S meter.
>
> The RF gain must be ahead of the DSP system. This means the
> real signal
> level to the DSP could be reduced 30 dB or even
> significantly more than that
> amount.
>
> How and why would someone design a DSP system that could
> measure the level
> on a signal that was not actually present??? There is no
> cheap or easy way
> to do that, so Elecraft does what everyone else does.
> Ever since receivers
> began, the RF gain will either affect the absolute S meter
> reading in
> relationship to input level, or the S meter will show the
> increase in gain
> reduction by increasing resting S meter reading as the gain
> is reduced.
>
> I think you want something that cannot be done.
>
> Besides, S meter are pretty much meaningless anyway. I only
> use mine to tell
> me when I need to use an attenuator pad or a preamp.
>
> 73 Tom
>
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html