Re: KX1 - >6Watts on 30&40
Posted by
Michael Babineau-2 on
Jul 22, 2010; 4:35pm
URL: http://elecraft.85.s1.nabble.com/KX1-6Watts-on-30-40-tp5325218p5326200.html
Jim :
I made the documented power mod to my KX1 as I was getting too little power out, but then I
had a similar experience to yours when running off of a power supply or a fully charged SLA battery so
I built a "poor mans" voltage regulator that I can put in series with my power cable when powering
the rig from an external source. All I did was to put a couple of diodes in series, with a third that
I can switch in and out and this provides a bit of a voltage drop. This way I can still get a reasonable
output with the internal batteries without frying the PA when I power the rig from 13.8V.
Michael VE3WMB
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html